ES | CN

ETA approved NJMKT anchors

+86 025 8665 1110
Home >> News

What is the reason why the curing effect of the reinforced structural adhesive is not good - the reinforced structural adhesive manufacturer Nanjing Mankate

Oct. 11, 2019


 When we recently summed up the after-sales problems, we found that one of the problems that many people consulted was why the curing effect of the reinforced structural adhesive was not good. In order to make everyone's project more smoothly and the effect of the reinforced structural adhesive reinforcement was better, we summed up several reasons why the curing effect of the reinforced structural adhesive is not good. Let's take a look at it.


 效果_副本.png


Mankate reinforced structural adhesive has passed the strict 50 years of anti-humid heat aging certification. It is more trustworthy!


 (1) The curing time is not controlled well.


 The curing time of the reinforced structural adhesive is affected by many factors. In the face of different substrate temperature, the time required for the curing of the reinforced structural adhesive is different. The higher the temperature of the substrate, the shorter the curing time of the reinforced structural adhesive.  Conversely, the lower the temperature of the substrate, the longer the curing time of the reinforced structural adhesive.  The following picture shows the curing schedule of Nanjing Mankate MT500 high temperature resistant reinforced structural adhesive for your reference:


 

效果1_副本.png

What is the curing time?  A schedule is all known!


 (2) The error of the proportion of the reinforced structure adhesive 


 As mentioned above, there are many factors affecting the curing time of the reinforced structural adhesive. One of which is the factor of the reinforced environment, which is why the summer reinforced structural adhesive is not suitable for winter one, and Some brands have different proportions of summer reinforced structural adhesives A and B ratio and winter planting bar structural adhesive. Therefore, it is beneficial to solidify the structural adhesive according to the seasons.


(3) The construction technology of the planting bar structural adhesive is wrong.


 The reinforcement of the reinforced structural adhesive has a strict construction process. Many people do not strictly follow the construction process of the reinforced structural adhesive. Therefore, the curing effect of the reinforced structural adhesive is of course not good.  The points that we should pay attention to during the construction are that the size of the hole should be drilled strictly according to the design drawings of the project; do not overfill or not too little when filling the glue, preferably two-thirds of the holes are inside;  The part of the steel bar to be inlaid shall be treated with rust, and the surface of the steel bar shall be free of oil.


 

效果2_副本.png

 Mankate supports customers to read the data and then place an order.  No reason to refund within 30 days!


So after seeing the above reasons, is it clearer for you why the curing effect of the reinforced structural adhesive is not good?  If you don't understand, it doesn't matter. If you find that the curing effect is not good, or if the quality of the structural adhesive is problematic, you can call Mankate 24 hours a day.  Service hotline: 400-894-5118, we will have professional technicians to explain the reasons for the poor performance of your engineering planting structural adhesive, give satisfactory answers and solutions. We also provide 30 days of unrequited after-sales service.  In the pre-sales, it is free to send samples, you can see the test data and then place an order.


 


 Link to this article: https://www.njmkt.net/Article/zjjghxgbhs.html


 (Editor: Nanjing Mankate, if you need to reprint, please indicate the source)